20’ Power Cable 18/2 UL2464 lighting & power supply 12V - DC barrel connectors

Description

Bulk cable Sold in 20 foot increment
With 2 sets
2.1 X 5.5 BARREL CONNECTOR
Terminal Block Adapters
The Red Black Pair Cable (RBC) is a UL2464 bulk electronic grade black jacketed flexible interconnect cable with 18 awg red/black conductors for DC power applications. This is a UL2464 rated indoor use cable that is flexible and of a small 5mm outer diameter. It has a smooth, round, pressure extruded outer jacket to remove convolutions and also has good flexibility with a 5/8 inch typical bend radius. The round cable coils well for storage when used for portable power applications.
The UL2464 two conductor red/black pair 18 awg cable type is suitable for low voltage control and power interconnect applications for LED driver power supplies, dimmers, motion controls, and LED modules.
The UL2464 specification covers the use of cable for internal wiring or external interconnection of electronic equipment.
The cable carries the VW-1 marking for flame retardancy testing covered under UL1581.
Specifications:
Awg: 18 (2 PVC insulated conductors red and black) bare copper flexible 41 strand
Amp: 10 Max.
Volts: 300 max.
System volts: 12 – 24 Typical.
Flammability: VW-1
Certifications: UL component (Cable is marked UL)
Maximum operating temperature: 80 °C Dry
Composition: Rohs/Reach
O.D. of Jacket Insulation: 5.0mm (0.197”) Typ.
O.D. of inner conductor insulation: 1.85mm (0.073”) Typ.
Applications
:
The RBC-18AWG-UL2464 is jacketed with abrasion resistant PVC; this uniformly round outer jacket provides a good seal with standard cable grips. A proper size fuse or circuit breaker is recommended to protect the cable circuit from overload currents.
Circuit protection should be set to a maximum of 10 amps.
For applications with the cable bundled with other cables or with operating ambient temperatures is above 50 °C (122 °F) the circuit protection should be lowered to 7.5 amps maximum. The RBC-18AWG-UL2464 is suitable for many applications including the following:
LED stage, studio and theater lighting
Prop and set effects low voltage DC cabling
LED decorative lighting
Small solar panel systems
Portable battery packs
Low voltage DC extension power cables, and power supply output cable assemblies
Equipment interconnect
CCTV Security Camera power extension cables
Communications radio equipment power
12V DC low voltage power systems
ATB ADAPTER PAIR LED LIGHTING ACCESSORIES 2.1 X 5.5 BARREL CONNECTOR 12 VOLTS DC
A Male / Female pair of DC barrel power connector adapters. Intended for interconnect of 12 volt LED Lighting accessories; dimmers, motion sensors, switch, etc. to power supplies.
Also used with CCTV 12 volt camera systems to adapt to power supplies, etc.
Characteristics
DC Barrel Adapter Male / Female Pair to terminal block
LED Lighting low voltage applications rating: 3.0 amps at 12.0 volts (36 watts) continuous Max.
Operation usage temperature range: -20C to +60C (-4F to +140F)
Insulation: PVC
Recommended wire size for terminal block: 18 AWG stranded
Male adapter accepts 2.1mm X 5.5mm Jack DC barrel connectors.
Female adapter accepts 2.1mm X 5.5mm Plug DC barrel connectors
.